A QINGDAO ZONGDA product-series websiteDEVELOPMENT & PRODUCTION DRILLING
ZDFJ76B/1 — Low-roof jumbo illustration from the supplied model brochure.
Low-roof jumbo illustration from the supplied model brochure.

ZDFJ76B/1

ZDFJ76B/1 Low-Roof Drilling Jumbo Manufacturer

A single-boom low-roof model for a restricted heading. Compare the travel outline and working clearance before choosing the drilling package.

Discuss configuration, documentation and delivery terms directly with ZONGDA.

SPECIFICATION REVIEW

ZDFJ76B/1 reference data

Published reference configuration
Drilling arrangementSingle boom
Stated hole depth2300 mm
Listed drill-rod length2500 mm
Maximum feed force15 kN
Main electric motor55 kW
The source contains different diameter ranges in its drill and rod tables; the selected package must be confirmed. Do not interpret the 1300 mm lowered-canopy dimension as guaranteed operation in a 1.3 m heading.

APPLICATION & PROCUREMENT

Review the working task

ZDFJ76B/1 is a single-boom low-roof drilling jumbo for enquiries involving restricted underground headings. The reviewed reference specification lists a stated hole depth of 2300 mm, a drill-rod length of 2500 mm, maximum feed force of 15 kN and a main electric motor of 55 kW. These values describe separate equipment characteristics and should retain their original units.

For buyers looking for a low-roof drilling jumbo manufacturer, usable space is the central selection issue. The machine must be reviewed in its travelling and working arrangements. The brochure's lowered-canopy dimension does not establish the clearance needed for drilling, positioning or operator access at your site.

Include in your inquiry

  • Minimum usable travel and face dimensions
  • Requested drill rod, hole diameter and depth
  • Canopy and operating arrangement
Prepare Model Inquiry

Configuration and selection

Send the smallest usable height and width along the route, including supports, pipes and cables that reduce the available opening. Add the face drawing and show the intended hole directions. A carrier that fits a straight section may still require a different envelope when turning, positioning the feed or setting up at the face. Ask the supplier for drawings covering those conditions.

The source contains differing diameter ranges in its rock-drill and rod tables. Keep that discrepancy open until a matched tooling package is identified. Do not assemble a specification by taking the broadest range from one table and the preferred rod from another. The low-roof procurement checklist provides a practical way to collect these questions before requesting a final offer.

Application requirements

This model belongs in a face-drilling enquiry where roof restrictions influence the machine arrangement. Epiroc's underground drilling classification separates face jumbos from production rigs. It offers industry context only; ZDFJ76B/1 dimensions and equipment details come from the supplied ZONGDA documents.

Describe the work rather than relying on the phrase low roof. Include face geometry, hole depth, requested diameter, rock conditions and utility availability. If you are comparing a less restricted single-boom arrangement, review ZDFJ76A1 on its own technical basis. A low-profile label does not establish that one machine is suitable for every narrow-vein heading, and this page is not an operating or clearance-approval instruction.

Supplier quotation and scope of supply

A useful ZDFJ76B/1 supplier quotation should name the canopy arrangement, rock drill, feed, rods and the proposed diameter range together. Ask for the complete travelling outline, working coverage drawing and operator arrangement. Where the supplied brochure describes options, have the offer distinguish included equipment from items requiring separate confirmation.

  • Provide a route survey or dimensioned sketch and the intended face layout.
  • State the required hole diameter and depth without inferring one from rod length.
  • Identify available electricity, water and other services for technical review.
  • Ask for an itemised tooling and spare-parts list linked to the quoted package.

For commercial comparison, include quantity and destination, then request price, delivery terms, warranty terms and support scope in writing. These conditions are not fixed by the catalogue. Ask which documents accompany the offered configuration and whether they address your project's requirements. Use the original model brochure as the reference for questions, with unresolved diameter and clearance points explicitly recorded in the quotation review.

ZDFJ76B/1 procurement FAQ

Can the machine be specified for a 1.3 m heading?

The 1300 mm lowered-canopy figure is not a guarantee of operation in a 1.3 m heading. The complete travel and working envelopes, operator arrangement and site conditions need review. Ask for the applicable drawings rather than treating the canopy dimension as a minimum operating height.

Which drilling diameter should be written into the purchase specification?

Write your required hole diameter and ask the manufacturer to confirm a compatible rock-drill, rod and feed package. The source tables contain differing ranges, so this page does not publish a merged range as a settled machine capability.

Are drill-rod length and hole depth the same figure?

No. The reviewed listing gives a 2500 mm rod length and a stated 2300 mm hole depth. Preserve those labels when comparing proposals. Ask which rod and feed are included and whether the quoted package meets your required hole depth within the available working space.

Ordering and after-sales support

Can the proposed drilling configuration be customized?

Product-specification customization is available for discussion with ZONGDA. Send the face layout, hole requirements and site constraints with your request. Have the team identify which changes it can supply and document the accepted configuration; a general customization statement does not establish a new drilling capability.

When should I place a drilling-equipment order?

The company's general order guidance is normally one to two months. Expedited production is supported and stock is sometimes available, but neither confirms availability of this drilling model. Include your required site date and destination so ZONGDA can quote the current production and delivery arrangement.

Can ZONGDA support commissioning and maintenance?

ZONGDA lists installation and commissioning, spare-parts supply, and online and local technical support among its services. Tell the team where the equipment will operate and what assistance you need. Confirm the applicable service arrangements and warranty policy with the machine offer, including any proposed on-site work.

Payment, delivery and service arrangements

Discuss This Order

Source document and next checks

Read the original supplied technical document alongside these selected reference figures. Confirm the current revision and configuration in your quotation.

Open original technical file (PDF)

SPECIFY YOUR REQUIREMENT

Bring the operating conditions.
Request the right configuration.

Include drilling task, face coverage, site utilities, quantity and delivery destination in your inquiry.

Request a Technical Quote